NetModule NG800-LWWtGd2Br2C-OEM

With the progression of digitalization in daily life also the demand for multi-functional connectivity in vehicles of any kind is rapidly growing. Applications like Telematics, Fleet Management, Asset Tracking and E-Mobility require enormous amounts of data from different sources. Therefore, it is important to collect real-time data about the location, fuel consumption, driver behavior, machine health status and others to optimize business and save costs.

The NetModule NG800 multifunctional IoT-Device, suitable for harsh environments, provides the necessary robust communication between on-board vehicle equipment and cloud applications.

The modular concept of software, electronics and mechanical components to be optimized for specific target applications.

For wireless communication, NG800 is equipped with an LTE modem, 2 SIM slots for failover links, WiFi 802.11a/b/g/n as client or small in- vehicle access point, GNSS dead reckoning, IMU and Bluetooth. A Molex CMC 48 pin connector serves for all wired interfaces such as CAN, Broad-R Reach, Fast Ethernet, DIO or RS-232.

The platform core features can be extended with a customized module to provide additional interfaces or embed parallel CPU subsystems using the Ethernet backplane.

With the robust IP65 protection level using a thermoplastic cover and an aluminum bottom plate, it is made for outdoor/ out of vehicle use. Optional internal LTE, WiFi or GNSS antennas can reduce the overall costs.

The product platform includes the OEM Linux OS which supports all hardware components. Customers can easily implement applications an offer their Telematics products.


Applications

• Emergency Services
• Smart Traffic
• Fleet Management
• Tracking
• Oil & Gas
• Mining
• Agriculture
• eMobility
• Telematics

Specifications

Mobile / Cellular


Standard

1x Multimode LTE, UMTS, GSM for EMEA
4G – LTE B1 (2100), B3 (1800), B5 (850), B7 (2600), B8 (900), B20 (800)
3G - DC-HSPA+/UMTS B1 (2100), B2 (1900), B5 (850), B8 (900)
2G - GSM/GPRS/EDGE B2 (1900), B3 (1800), B5 (850), B8 (900)
Category LTE Cat 4
Antenna ports 2x2 MIMO
Datarate down / up (max) 150 Mbps / 50 Mbps
Voice CSFB
FCC ID XPYTOBYL210

Region
Europe, Middle East and Africa (EMEA)

Connectors
2x SMA female, IP65

SIM
1x Micro SIM - 3FF, 1x eSIM - MFF2 (on request)



WiFi / WLAN


Standard

1x Dual-band WLAN 2.4/5 GHz a/b/g/n + BT 4.2 combo
Wireless standard IEEE 802.11a/b/g/n
Bluetooth 4.2, Bluetooth Low Energy
Frequency 2.4/5 GHz
Antenna ports 2x2 MIMO
Datarate (max) 144 Mbps 2.4 GHz 2x2 MIMO, 150 Mbps 5 GHz SISO
Modes Client or access point (up to 10 clients)
FCC ID Z64-WL18DBMOD

Connector
2x SMA female, IP65



Ethernet


Standard

1x Fast Ethernet
Ethernet standard 100BASE-TX, Auto MDIX
Speed 10/100 Mbps

2x Automotive Ethernet - BroadR
Ethernet standard 100BASE-T1 (BroadR-Reach)
Speed 10/100 Mbps

Connector
1x CMC-48 header



Positioning


Standard

1x Multi-GNSS with Automotive Dead Reckoning
Receiver BeiDou, Galileo, GLONASS, GPS/QZSS
72-channel u-blox M8 engine
3 concurrent GNSS channels
Integrated motion sensors
Antennas Active or passive
Accuracy Up to 2.5 m CEP
Sensitivity Up to –160 dBm
Services Standalone, assisted GPS
3D Dead Reckoning
Data server with JSON, NMEA data stream

Connector
1x SMA female, IP65



Serial, Fieldbus


Protocol

1x RS-232
Protocol EIA-232
Signals TX, RX
Signal level High > 5 VDC, low < -5 VDC
Bit rate Up to 1 Mbps

2x CAN
Protocol Controller Area Network V2.0B (ISO 11898)
Signals CANH, CANL
Signal level High > 2.75 V, low < 2.0 V
Bit rate Up to 1 Mbps
Bus access Active - read and write access
Passive - read access only on request (Option -Cm)

Connector
1x CMC-48 header, IP69K



System


Core
1000 MHz single core, 512 MB RAM, 8 GB flash

Module Slots
1x Extension Module



Software


Features
NetModule Linux Operating System
Software support for the hardware board in a Yocto Linux distribution
OEM Linux OS Package OpenEmbedded-Core, Yocto Project-specific metadata, BSP layer provided by NetModule, Distro layerprovided by NetModule
Board Support Package The meta-layer “meta-netmodule-bsp” includes receipes to create Bootloader and Kernel
Services Systemd, NetworkManager, ModemManager, Bluez, SocketCan, GPSd, Hostapt, OSTree Update, NTP, Package Manager(DNF), Python Environment
Software Development Kit (SDK) Includes cross-development toolchain, libraries, headers files and further tools.



Power


Input Voltage
12, 24 VDC
Nominal voltages 12, 24 VDC
Absolute voltages9 VDC to 36 VDC
Power Management Various power modes and wake-up sources (on request)

Ignition Sense
Yes

Connector
1x CMC-48 header

Consumption
10 W (max), power down state < 2 mA @ 24 VDC



Mounting


Bracket



Dimensions


W x H x D
Width 200 mm x height 40 mm x depth 120 mm



Environment


OperatingTemperature
-40°C to +75°C

Ingress ProtectionLevel
IP55, IP69K (pending)



Certifications


Compliance
CE according to 2014/53/EU (RED), Vehicle according to UN ECE R10 and UN ECE R118 (pending)

Domain
Vehicle